1 Replacement of dual mass flywheel may cause added gear noise
2 Designed for aftermarket stacked style clutch. Check for fitment.
3 1996 and up must use 1995 clutch and flywheel mounting bolts (not included)
4 Call for complete application list
5 External balance weights are included in the hardware kit supplied with the flywheel
7 1986-1988 models must use original Mazda part #N327-11-521A (not included)
1989-1995 models must use original Mazda part #N351-11-521 (not included)
2004-2006 models must use original Mazda part #N3Z2-11-52X (not included)
8 Confirm fitment before installation
9 For 383 or 400 C.I.D. engine must use part #624001 balance plate
For 454 C.I.D. engine must use part #624541 balance plate
For 502 C.I.D. engine must use part #625021 balance plate
10 Includes 10.4" clutch pattern
11 Includes 10.4" & 11" clutch patterns
12 Includes 8.5", 9" & 9.5" clutch patterns
13 Includes 10.5" Borg & Beck and 10.5" Metric clutch patterns
14 Includes 10.5" & 11" Long Style and 11" Diaphragm clutch patterns
15 Includes 11" & 11.5" 3-Finger and 11" Diaphragm clutch patterns
16 Includes 10.5" & 11" 3-Finger and 11" Diaphragm clutch patterns
17 Includes 10", 10.5" & 11" 3-Finger and 11" Diaphragm clutch patterns
18 Use of locating dowels for clutch not necessary
19 Use 95 Neon 2.0L standard transmission flywheel mounting bolts
20 Application requires two (one pair)
21 Re-use OE bolt on ring gear
22 Except reverse mount clutch/flywheel assembly
23 SOHC requires one
24 Please call for release date details
25 Must use VW/Audi Part N907-059-01, Flywheel to crankshaft bolts for safe and proper installation
26 If friction surface has an 11.75" dia., use part #RZ21171
If friction surface has an 11" dia., use part #RZ21101
27 If friction surface has an 8.75" dia., use part #RZ28751
If friction surface has a 9" dia., use part #RZ29001
28 If friction surface has a 9.85" dia., use part #RZ29851
If friction surface has a 9.5" dia., use part #RZ29501
29 If friction surface has a 5.075" inner dia., use part #RZ28501
If friction surface has a 5.875" inner dia., use part #RZ28591
30 Fits exhaust side only
31 Fits both intake and exhaust cams on 90-97 models. Fits exhaust cams only on 99-03 when stock ECU is used
32 360 CID must use included weight
33 If friction surface has a 9.00" outside diameter, use part #RZ29001
If friction surface has a 9.25" outside diameter, use part #RZ29251
34 Vehicles older than 1986 do not use Delrin Carrier Bushings
35 Stock selector rod may require modification in vehicles equipped with harmonic balance ring
36 Oval bushings used from 4/92+